124 Products
Sku: TECK-4712240600
TECHNIKS 47.122.40.600 DualDRIVE Shrink Fit Toolholder Tapered Shank SCAT50 Machine Side For Use With Dual Contact Spindles
Sku: TECK-4712232800
TECHNIKS 47.122.32.800 Dual Drive Single End Collet Chuck Tapered Shank ER32 Collet System ER32 Chuck
Sku: TECK-4712232600
TECHNIKS 47.122.32.600 Dual Drive Single End Collet Chuck Tapered Shank ER32 Collet System ER32 Chuck
Sku: TECK-4465377460
TECHNIKS 44.653.77.460 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1-1/2 in Dia Hole Tapered Shank CAT50 Taper 2-1/2 in Dia Nose 4.6 in Projection
Sku: TECK-4465372800
TECHNIKS 44.653.72.800 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1-1/4 in Dia Hole Tapered Shank CAT50 Taper 2-1/2 in Dia Nose 8 in Projection
Sku: TECK-4465372600
TECHNIKS 44.653.72.600 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1-1/4 in Dia Hole Tapered Shank CAT50 Taper 2-3/4 in Dia Nose 6 in Projection
Sku: TECK-4465368600
TECHNIKS 44.653.68.600 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1 in Dia Hole Tapered Shank CAT50 Taper 2.484 in Dia Nose 6 in Projection
Sku: TECK-4465368400
TECHNIKS 44.653.68.400 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1 in Dia Hole Tapered Shank CAT50 Taper 2 in Dia Nose 4 in Projection
Sku: TECK-4465364600
TECHNIKS 44.653.64.600 DualDRIVE Single End End Mill Holder With Coolant Through Channel 3/4 in Dia Hole Tapered Shank CAT50 Taper 1-3/4 in Dia Nose 6 in Projection
Sku: TECK-4465364400
TECHNIKS 44.653.64.400 DualDRIVE Single End End Mill Holder With Coolant Through Channel 3/4 in Dia Hole Tapered Shank CAT50 Taper 1-3/4 in Dia Nose 4 in Projection
Sku: TECK-4465361600
TECHNIKS 44.653.61.600 DualDRIVE Single End End Mill Holder With Coolant Through Channel 5/8 in Dia Hole Tapered Shank CAT50 Taper 1-1/2 in Dia Nose 6 in Projection
Sku: TECK-4415186400
TECHNIKS 44.151.86.400 DualDrive Single End Face Mill Arbor 2 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415186240
TECHNIKS 44.151.86.240 DualDrive Single End Face Mill Arbor 2 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415177800
TECHNIKS 44.151.77.800 DualDrive Single End Face Mill Arbor 1-1/2 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415177400
TECHNIKS 44.151.77.400 DualDrive Single End Face Mill Arbor 1-1/2 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415172600
TECHNIKS 44.151.72.600 DualDrive Single End Face Mill Arbor 1-1/4 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415168600
TECHNIKS 44.151.68.600 DualDrive Single End Face Mill Arbor 1 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415168400
TECHNIKS 44.151.68.400 DualDrive Single End Face Mill Arbor 1 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4415164550
TECHNIKS 44.151.64.550 DualDrive Single End Face Mill Arbor 3/4 in Arbor 3-7/8 in OD CAT50
Sku: TECK-4365372460
TECHNIKS 43.653.72.460 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1-1/4 in Dia Hole Tapered Shank CAT40 Taper 2-1/2 in Dia Nose 4.6 in Projection
Sku: TECK-4365368400
TECHNIKS 43.653.68.400 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1 in Dia Hole Tapered Shank CAT40 Taper 2 in Dia Nose 4 in Projection
Sku: TECK-4365364350
TECHNIKS 43.653.64.350 DualDRIVE Single End End Mill Holder With Coolant Through Channel 3/4 in Dia Hole Tapered Shank CAT40 Taper 1-3/4 in Dia Nose 3-1/2 in Projection
Sku: TECK-4365361375
TECHNIKS 43.653.61.375 DualDRIVE Single End End Mill Holder With Coolant Through Channel 5/8 in Dia Hole Tapered Shank CAT40 Taper 1-1/2 in Dia Nose 3-3/4 in Projection
Sku: TECK-4365358300
TECHNIKS 43.653.58.300 DualDRIVE Single End End Mill Holder With Coolant Through Channel 1/2 in Dia Hole Tapered Shank CAT40 Taper 1-1/4 in Dia Nose 3 in Projection
Sku: TECK-4315164400
TECHNIKS 43.151.64.400 DualDrive Single End Face Mill Arbor 3/4 in Arbor 2-1/2 in OD CAT40
Sku: TECK-32400/30BT
TECHNIKS 32400/30BT Tension/Compression Tap Holder BT30 Taper #1 Adapter 9/16 in Max Tap Capacity
Sku: TECK-229478
TECHNIKS 22947-8 Extended Length Precision Single End End Mill Holder With Coolant Through Channel 1-1/4 in Dia Hole Tapered Shank CAT50 Taper 2-1/2 in Dia Nose 8 in Projection
Sku: TECK-229476
TECHNIKS 22947-6 Extended Length Precision Single End End Mill Holder With Coolant Through Channel 1-1/4 in Dia Hole Tapered Shank CAT50 Taper 2-1/2 in Dia Nose 6 in Projection
Sku: TECK-229468
TECHNIKS 22946-8 Extended Length Precision Single End End Mill Holder With Coolant Through Channel 1 in Dia Hole Tapered Shank CAT50 Taper 2 in Dia Nose 8 in Projection
Sku: TECK-229458RR