Iscar 6004551 TANG-GRIP Parting Insert N3JT Insert TAGN Insert Material Grade: H K M N P S 3.05 mm W Cutting Neutral Lead Angle Direction 7 deg Relief Angle Carbide Manufacturer's Grade: IC908 PVD Coated

Features

• First choice for soft materials alloy steel and austenitic stainless steel Parting of tubes small diameters and thin walled parts Cutting edge with positive rake used at low-to-medium feeds JS - sharp corner Tang-grip clamping system - very rigid clamping in a tangentially oriented pocket Enables machining at very high feed rates and provides excellent straightness and surface finish Recommended for parting large diameter parts and for interrupted cuts Offers a free unobstructed chip flow Excellent tool and pocket life IC908 grade - a hard fine grain substrate with excellent chipping resistance combined with a TiAlN PVD coating Provides high wear and oxidation resistance Recommended for a very wide range of materials applications and machining conditions JT-type chipbreaker - the JT chipformer design is based on the J-type chipformer with a t-land reinforced frontal cutting edge length JT chipformer provides a solution for the intermediate range between the strong and negative C-type configuration and the positive edged J-type chipformer The JT chipformer can be used on a wide range of materials including soft or hard alloy and stainless steel high temperature alloys and also cast iron The JT chipformer deforms the chips into compact shapes in the same manner as the J-type but it can be used at higher feeds due to its reinforced edge